Filter
Top Products
6.14 isdn spid1
Syntax
isdn spid1 spid
undo isdn spid1
View
ISDN BRI Interface view
Parameter
spid: String comprising 9 to 20 digits.
Description
Using the isdn spid1 command, you can configure SPID information for the B1
channel on an NI-compliant BRI interface. Using the undo isdn spid1 command, you
can remove the SPID information form the B1 channel on the interface.
On a BRI interface compliant with the ISDN protocol in North America, calls can be
placed only after the SPID negotiation or initialization is finished. SPID information
can be obtained via static configuration or dynamic negotiation. Only after SPID
information is configured for the B1 channel on the BRI interface can the system
make the L3 initialization to place calls.
By default, SPID for the B1 channel on a BRI interface is null.
This command applies only on NI-compliant BRI interfaces.
Example
Set SPID to “012345” for the B1 channel on the interface bri0.
[3Com-bri0] isdn spid1 012345
6.15 isdn spid2
Syntax
isdn spid2 spid
undo isdn spid2
3Com Router Command Reference Guide Addendum for V1.2
100