Filter
Top Products
For the related command, see qos policy, qos-class.
Example
Configure traffic monitoring for a class. The normal traffic of packets is 38400bit/s.
Burst traffic twice of the normal traffic can pass initially and later the traffic is
transmitted normally when the rate does not exceed 38400bit/s. When the rate
exceeds 38400bit/s, the precedence of the packet turns to 0 and the packet is
transmitted.
[3Com] qos policy 3Com
[3Com-qospolicy-3Com] qos-class database
[3Com-qospolicy-c-3Com database] car cir 38400 cbs 76800 ebs 0 conform pass
exceed remark-prec-pass 0
1.3 debugging qos
Syntax
debugging qos { { cbq { af | be | ef | class } } | cq | pq | wfq } [ interface type
number ]
undo debugging qos { { cbq { af | be | ef | class } } | cq | pq | wfq } [ interface type
number ]
View
All views
Parameter
cbq af: Enable the debugging of confirming forwarding information in CBQ.
cbq be: Enable the debugging of best-effort forwarding information in CBQ.
cbq ef: Enable the debugging expedited-forwarding information in CBQ.
cbq class: Enable the debugging of the class information of CBQ.
cq: Enable the debugging of the CQ.
pq: Enable the debugging of the PQ.
wfq: Enable the debugging of the WFQ.
interface type number: Enable the debugging of the interface QoS. If this parameter
is not used, the QoS debugging of all interfaces will be enabled.
3Com Router Command Reference Guide Addendum for V1.2
5