Filter
Top Products
Description
Using qos policy command, you can define a policy and enter map view. Using undo
qos policy command, you can delete a policy.
The policy cannot be deleted if it is applied on an interface. It is necessary to remove
application of the policy on the current interface before deleting it via the undo qos
policy command.
For the related commands, see qos class, qos apply policy.
Example
Define a policy named 3COM.
[3Com] qos policy 3Com
[3Com-qospolicy-3Com]
1.25 qos reserved-bandwidth
Syntax
qos reserved-bandwidth pct percent
undo qos reserved-bandwidth
View
Interface view
Parameter
pct percent: Percentage of reserved bandwidth in available bandwidth, ranging from 1
to 100. By default, it is 75.
Description
Using qos reserved-bandwidth command, you can set the percentage of the
maximum reserved bandwidth in available bandwidth. Using undo qos
reserved-bandwidth command, you can recover the default configuration.
While allocating bandwidth for a QoS queue, considering that part of the bandwidth is
used for controlling protocol packets and L2 header, it is suggested that the
bandwidth be not larger than 75% of total bandwidth.
For the related command, see qos max-bandwidth.
3Com Router Command Reference Guide Addendum for V1.2
26