Filter
Top Products
View
ISDN BRI interface view, CE1/PRI interface view, CT1/PRI interface view
Parameter
None
Description
Using isdn waitconnectack command, the user can configure the router to wait for
CONNECT ACK message replies from the connected exchange until switching to the
ACTIVE state. Using undo isdn waitconnectack command, the user can configure
the router to become ACTIVE to start data exchange before receiving CONNECT
ACK messages. By default, Q.931/Q.SIG must wait for the CONNECT ACK
messages before it can be ACTIVE.
Some exchanges will send CONNECT ACK messages but some will not.
Example
Configure the router to become ACTIVE to start data exchange before receiving
CONNECT ACK messages.
[3Com] undo isdn waitconnectack
6.5 display isdn spid
Syntax
display isdn spid [ interface type number ]
View
All views
Parameter
interface type number
Description
Using the display isdn spid command, you can view the SPID information on the
BRI interface running the NI protocol.
You may execute this command to view the SPID type and SPID value when ISDN is
running. Executing this command, without specifying an interface, to view the related
3Com Router Command Reference Guide Addendum for V1.2
91