Filter
Top Products
View
ISDN BRI Interface view
Parameter
spid: String comprising 9 to 20 digits.
Description
Using the isdn spid2 command, you can configure SPID information for the B1
channel on an NI-compliant BRI interface. Using the undo isdn spid2 command, you
can remove the SPID information from the B1 channel on the interface.
On a BRI interface compliant with the ISDN protocol in North America, calls can be
placed only after the SPID negotiation or initialization is finished. SPID information
can be obtained via static configuration or dynamic negotiation. Only after SPID
information is configured for the B1 channel on the BRI interface can the system
make the L3 initialization to place calls.
By default, SPID for the B2 channel on a BRI interface is null.
This command applies only on NI-compliant BRI interfaces.
Example
Set SPID to “012345” for the B2 channel on the interface bri0.
[3Com-bri0] isdn spid2 012345
3Com Router Command Reference Guide Addendum for V1.2
101