Filter
Top Products
Description
Using the debugging ntp-service command, you can debug all the information of
the NTP service. Using the undo debugging ntp-service command, you can disable
the specified debugging.
By default, debugging of all the information is disabled.
Example
Enable NTP access control debugging.
[3Com] debugging ntp-service access
4.2 display ntp-service sessions
Syntax
display ntp-service sessions [ verbose ]
View
All views
Parameter
verbose: Specifies to or not display the details of sessions.
Description
Using the display ntp-service sessions command, you can display the state
information of all the sessions maintained by the NTP service of the local device.
By default, the state information of all the sessions maintained by the NTP service of
the local device is displayed.
Without the argument verbose, the command will display only the brief information of
the all the sessions maintained by the local device.
With the argument verbose, the command will display the details of the all the
sessions maintained by the local device.
Example
Display the information of the sessions maintained by the NTP service at the local
device.
[3Com] display ntp-service sessions
source refid st now poll reach delay offset dis
3Com Router Command Reference Guide Addendum for V1.2
68