Filter
Top Products
1.19 if-match rtp
Syntax
if-match [ logic-not ] rtp start-port starting-port-number end-port end-port-number
undo if-match [ logic-not ] rtp start-port starting-port-number end-port
end-port-number
View
Class view
Parameter
starting-port-number: Starting RTP port number in the range of 2000 to 65535.
end-port-number: Ending RTP port numbers in the range of 2000 to 65535.
Description
Using the if-match rtp command, you can define port match rule of RTP. Using the
undo if-match rtp command, you can delete the port match rule of RTP.
This command is used to match RTP packets in the specified RTP port range, that is,
match the packets of even UDP port numbers between starting-port-number and <
end-port-number. If this command is frequently used under a class, the last
configuration will overwrite the previous ones.
For the related command, see qos class.
Example
Define the match rule of class1 as matching the packets whose RTP port number is
the even UDP port number between 16384 and 32767.
[3Com] qos class class1
[3Com-qosclass-class1] if-match rtp start-port 16384 end-port 32767
1.20 qmtoken
Syntax
qmtoken token-number
undo qmtoken
3Com Router Command Reference Guide Addendum for V1.2
21