Filter
Top Products
destination addresses for receiving the response messages except for the specified
one.
Example
Specify the interface Ethernet 0 so that its IP address can be used as the source IP
address carried by all the outbound NTP message packets.
[3Com] ntp-service source-interface Ethernet 0
4.16 ntp-service source-interface disable
Syntax
ntp-service source-interface disable
undo ntp-service source-interface disable
View
Interface view
Parameter
None
Description
Using the ntp-service source-interface disable command, you can disable an
interface to receive NTP messages. Using the undo ntp-service source-interface
disable command, you can enable the interface to receive NTP messages.
By default, an interface is enables to receive NTP messages.
Example
Disable Ethernet 0 to receive NTP messages.
[3Com] interface Ethernet 0
[3Com-Ethernet0] ntp-service source-interface disable
4.17 ntp-service unicast-peer
Syntax
ntp-service unicast-peer X.X.X.X [ version number | authentication-key keyid |
source-interface { interface-name | interface-type interface-number } | priority ] *
3Com Router Command Reference Guide Addendum for V1.2
80