Filter
Top Products
Parameter
None
Description
Using the isdn spid auto-trigger command, you can enable SPID auto-negotiation
once on the BRI interface running the NI protocol.
On a BRI interface compliant with the North American ISDN protocol, the router can
place a call only after SPID negotiation or initialization. SPID information can be
obtained via static configuration or dynamic negotiation. You may manually trigger a
new SPID negotiation request by executing this command if the SPID negotiation in
dynamic negotiation fails or just for the purpose of testing.
By default, a BRI interface does not originate a SPID negotiation request unless
triggered by a call.
This command applies only on the BRI interface running the NI protocol.
Example
Manually trigger a new SPID negotiation request on the interface bri0.
[3Com-bri0] isdn spid auto-trigger
6.10 isdn spid nit
Syntax
isdn spid nit
undo isdn spid nit
View
ISDN BRI Interface view
Parameter
None
Description
Using the isdn spid nit command, you can set the SPID processing mode to NIT
(Not Initial Terminal) on an NI-compliant BRI interface. Using the undo isdn spid nit
command, you can disable the NIT mode on the BRI interface.
3Com Router Command Reference Guide Addendum for V1.2
96