Filter
Top Products
Description
Using the ntp-service unicast-server command, you can enable the NTP server
mode. Using the undo ntp-service unicast-server command, you can disable the
NTP server mode.
By default, version number is 3, authentication is enabled, and the server is not the
preferred choice.
This command declares that the local time server is the remote server specified by
X.X.X.X. X.X.X.X represents a host address, which must not be a broadcast or
multicast address, or the IP address of the reference clock. Configured with this
command, the local device is working in client mode and therefore it is up to the local
client to synchronize with the remote server rather than vice versa.
Example
Configure the local device to synchronize with the server at 128.108.22.44 and set
the version number to 3.
[3Com] ntp-service unicast-server 128.108.22.44 version 3
3Com Router Command Reference Guide Addendum for V1.2
83