Filter
Top Products
1.2 car
Syntax
car cir rate [ cbs size ebs size ] [ conform action [ exceed action] ]
undo car
View
Policy-class view
Parameter
cir rate: Committed information rate in the range of 8000 to 155000000 bit/s.
cbs size: Committed burst size, that is, the number of bits that can be sent in each
interval in the range of 15000 to 155000000 bits. By default, it is 15000.
ebs size: Excessive burst size in the range of 0 to 155000000 bits. By default, it is 0.
Conform: Action (defaulted to pass) conducted to the packets when the traffic of the
packets conforms to the CIR.
exceed: Action (defaulted to discard) conducted to the packets when the traffic of the
packets does not conform to the CIR.
action: Action conducted to a packet, including:
discard: Drop the packet
remark-dscp-pass new-dscp: Set new-dscp and transmit the packet. It ranges
from 0 to 63.
remark-prec-pass new-precedence: Set new-precedence of IP and transmit the
packet. It ranges from 0 to 7.
pass: Transmit the packet.
Description
Using the car command, you can configure traffic monitoring for a class. Using the
undo car command, you can delete the configuration of traffic monitoring.
When being used in interface policy, car can be used in the input or output direction
of the interface.
Applying a policy configured with car on an interface will cause the previous qos car
command ineffective.
If this command is frequently configured on the classes of the same policy, the last
configuration will overwrite the previous ones.
3Com Router Command Reference Guide Addendum for V1.2
4