Filter
Top Products
This command applies only on NI-compliant BRI interfaces.
Example
Set the duration of TSPID on the interface bri0 to 50 seconds.
[3Com-bri0] isdn spid timer 50
6.12 isdn spid resend
Syntax
isdn spid resend times
undo isdn spid resend
View
ISDN BRI Interface view
Parameter
times: An integer in the range of 1 to 255 times, which defaults to 1.
Description
Using the isdn spid resend command, you can set the number of INFORMATION
message retransmission attempts for SPID negotiation or initialization on an
NI-compliant BRI interface. Using the undo isdn spid resend command, you can
restore the default number of INFORMATION message retransmission attempts on
the interface.
On a BRI interface compliant with the ISDN protocol in North America, calls can be
placed only after the SPID negotiation or initialization is finished. The timer TSPID is
started when the terminal originates a negotiation or initialization request by sending
the INFORMATION message. If the terminal does not receive any response upon the
expiration of TSPID, it will retransmit the INFORMAITON message. You can use this
command to modify the number of INFORMATION message retransmission attempts.
This command applies only on NI-compliant BRI interfaces.
Example
Set the allowed number of INFORMATION retransmission attempts to five.
[3Com-bri0] isdn spid resend 5
3Com Router Command Reference Guide Addendum for V1.2
98