Filter
Top Products
2.10 source-ip
Syntax
source-ip { ip-address | interface interface-type interface-number }
undo source-ip
View
Hwtacacs view
Parameter
ip-address: The source IP address of all the TACACS+ packets.
interface-type: Interface type, such as serial.
interface-number: Interface number, including the main interface number and the
sub-interface number.
Description
Using the source-ip command, you can specify a source IP address for the
TACACS+ packets transmitted from the Router. Using undo source-ip command,
you can disable specifying a source IP address for the TACACS+ packets.
By default, no IP address is specified for transmitting TACACS+ packets
If the same source IP address is specified for all the TACACS+ packets, the
TACACS+ server will only need to contact the router using that IP address, instead of
registering the IP addresses of all the interfaces that are likely to send TACACS+
packets.
An IP address must be assigned to the specified interface.
Only one source IP address can be configured for a TACACS+ server group, but
different source IP addresses can be configured for different groups.
Example
# TACACS+ takes the IP address of the interface Loopback 1 as the source IP
address of all the TACACS+ packets.
[Router] hwtacacs-server template tactemplate1
[Router-hwtacacs-tactemplate1]source-ip interface loopback 1
3Com Router Command Reference Guide Addendum for V1.2
46