Filter
Top Products
6-8 C
HAPTER
6: S
TATUS
M
ONITORING
AND
S
TATISTICS
Status Monitoring
The status screen provides read-only information
about the Switch. This information may be useful
for your technical support representative in the
event of a problem.
To access the screen, from the Main Menu, select
the STATUS option. The Status screen is displayed
as shown in Figure 6-5
.
The Status screen shows the following:
System Up Time
The time the unit has been run-
ning since the last reset or power-off/on cycle.
Number of Resets
The total number of system
resets since the Switch was first installed or initial-
ized; either power on, manual reset or a watchdog
expiry.
Last Reset Type
Other / Command / Watchdog /
Power Reset / System Error
This field indicates the
cause of the last reset. It may be due to manage-
ment command, watchdog timeout expiry, power
interruption, a manual reset or a system error.
Hardware Version
The hardware version number
of the Switch.
Figure 6-5
Status screen
Upgradable Software Version
The version
number of the agent software image stored in
Flash EPROM. This version number is automatically
updated when you download new software.
Boot Software Version
This is the version number
of the Boot software stored on the Switch.
FAULT LOG
Select this button to display the Switch
Fault Log, described in the next section.