Filter
Top Products
Spanning Tree Protocol 5-17
Enabling STP on the Switch
To enable STP on your Switch:
1
From the VT100 Main Menu, select SWITCH
MANAGEMENT. The Switch Management screen is
displayed.
2
In the Management Level field, choose Unit.
3
Choose the SETUP button. The Unit Setup screen is
displayed as shown in Figure 5-13
.
4
In the Spanning Tree field, specify Enable.
5
Choose OK.
You cannot enable STP if you have set up resilient
links on any of the Switch ports, or if you are using
VLAN 16.
Figure 5-13
Unit Setup screen