3Com 3800 Switch User Manual


 
8-14 CHAPTER 8: IP UNICAST ROUTING
disable rip {vlan <name> | all} Disables RIP for one or more VLANs. When RIP is disabled, the
parameters are not reset to their defaults, and the states are not
cleared.
Disables RIP for a VLAN causes all routes learned from that VLAN
to be advertised with a GarbageTime metric of 16, before being
deleted from the route table.
disable rip aggregation Disables the RIP aggregation of subnet information on a RIP
version 2 interface.
disable rip splithorizon Disables split horizon.
disable rip poisonreverse Disables poison reverse.
disable rip triggerupdate Disables triggered updates.
disable rip exportstatic Disables the filtering of static routes.
unconfig icmp Resets all ICMP settings to the default values.
unconfig irdp Resets all router advertisement settings to the default values.
unconfig rip {vlan <name> | all} Resets all RIP parameters to the default VLAN. Does not change
the enable/disable state of the RIP settings.
Table 8-6 Router Reset and Disable Commands (continued)
Command Description
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM