Filter
Top Products
3-18 CHAPTER 3: ACCESSING THE SWITCH
disable smartredundancy <portlist> Allows you to disable the SmartRedundancy feature. If
the feature is disabled, the Switch changes the active
link only when the current active link becomes
inoperable.
show port <portlist> config Displays state, link status, speed, and autonegotiation
setting for each port.
show port <portlist> stats Displays port information including physical layer
configuration and statistics.
show port <portlist> errors Displays error information for one or more ports.
show port <portlist> collisions Displays real-time collision statistics.
show port <portlist> packet Displays a histogram of packet statistics for one or more
ports.
show port <portlist> util Displays port utilization by percentage, bytes per
second, or packets per second. Use the space bar to
toggle between percentage, bytes per second, or
packets per second. Use the clear counters command to
reset values.
Table 3-8 Port Commands (continued)
Command Description
SW3800.BK Page 18 Tuesday, May 5, 1998 5:20 PM