3Com 3800 Switch User Manual


 
Port Statistics 9-5
The following port statistic information is collected by the Switch:
Link Status The current status of the link. Options are:
Ready — The port is ready to accept a link.
Active — The link is present at this port.
Transmit Packet Count (Tx Pkt Count) The number of packets
that have been successfully transmitted by the port.
Transmit Byte Count (Tx Byte Count) The total number of data
bytes successfully transmitted by the port.
Total Collisions — The total number of collisions seen by the port,
regardless of whether a device connected to the port participated in
any of the collisions. This value will always be zero for a full-duplex
device.
Received Packet Count (Rx Pkt Count) — The total number of good
packets that have been received by the port.
Received Byte Count (RX Byte Count) — The total number of bytes
that were received by the port, including bad or lost frames. This
number includes bytes contained in the Frame Check Sequence (FCS),
but excludes bytes in the preamble.
Receive Broadcast (RX Bcast) — The total number of frames received
by the port that are addressed to a broadcast address.
Receive Multicast (RX Mcast) — The total number of frames received
by the port that are addressed to a multicast address.
SW3800.BK Page 5 Tuesday, May 5, 1998 5:20 PM