Filter
Top Products
9-4 CHAPTER 9: STATUS MONITORING AND STATISTICS
Port Statistics The Switch 3800 provides a facility for viewing port statistic
information. The summary information lists values for the current
counter against every port on the Switch and it is refreshed
approximately every 2 seconds. Values are displayed to 9 digits of
accuracy.
To view port statistics, enter:
show port <portlist> stats
show stpd <stpd_name> port <portlist> Displays port-specific STP information, including STP port
configuration and state.
show switch Displays the current Switch information, including:
■ sysName, sysLocation, sysContact
■ MAC address
■ current time and date, and system uptime
■ operating environment (temperature, fans, and power
supply status)
■ NVRAM image information (primary/secondary image, date,
time, size, version)
■ NVRAM configuration information (primary/secondary
configuration, date, time, size, version)
■ Scheduled reboot information
■ 802.1p and PACE configuration information
■ System serial number and hardware rework indicators
■ Software platform
■ System identifier
show version Displays the current running software image and configuration
version number.
show vlan {<name> | all} When used with the keyword all, or with no named VLANs,
displays a summary list of VLAN names with a portlist and
associated status of each. When used with a named
identifier, displays port information including membership list,
IP address, tag information.
Table 9-1 Switch Monitoring Commands (continued)
Command Description
SW3800.BK Page 4 Tuesday, May 5, 1998 5:20 PM