Filter
Top Products
38 CHAPTER 3: WINDOWS 95/98 AND WINDOWS NT DRIVER INSTALLATION
6 Click Have Disk.
7 Insert EtherDisk diskette 1 in drive A, make sure that
A:\ appears in the entry box, and then click OK.
The Select OEM Option screen appears with the name
of one of the NICs selected. Only one NIC appears on
this screen.
8 Click OK.
Files are copied.
9 Insert EtherDisk diskette 2 when prompted.
Files are copied. The Network screen appears with the
name of the first installed NIC.
10 Close the Network screen.
If you are prompted for network information, enter the
requested information.
11 Restart the PC.
12 When Windows NT starts, repeat steps 3 through 11
for each NIC that is installed in the PC.
You will not be prompted for EtherDisk diskette 2 when
you install the driver and software for the second NIC.
book Page 38 Monday, March 15, 1999 1:31 PM