Filter
Top Products
4-9
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 001cc5bc3111
Press Ctrl-B to enter Boot Menu... 0
In normal startup mode, the waiting time here is five seconds. If you press Ctrl + B within five seconds,
the Boot Menu is displayed. If you press Ctrl + B within five seconds, the Boot Menu is displayed: If you
perform no operation or press a key other than Ctrl + B within five seconds, the system begins to
automatically start up and the following information is displayed:
Auto-booting...
Decompress Image................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
...........................................OK!
Board checking.......................LSP1LTSUD
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Subslot 1 (3CRS45G-24-91) selftest.........OK!
Please check leds....................FINISHED!
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed:
<Sysname>