Filter
Top Products
Factory Defaults 1-9
Factory Defaults Table 1-3 shows the factory defaults for the Switch 9000 features.
Table 1-3 Switch 9000 Factory Defaults
Item Default Setting
Port status Enabled on all ports
Default user account admin with no password and user with no
password
Console port configuration 9600 baud, eight data bits, one stop bit, no
parity, XON/XOFF flow control enabled
SNMP read community string Public
SNMP write community string Private
RMON history session Enabled
RMON alarms Enabled
■ Send trap if load is greater than 75% of
available bandwidth
■ Send trap if there are more than 10 errors in
1,000 packets
PACE Recognition disabled
Virtual LANs One VLAN named default; all ports belong to the
default VLAN; no protocol filter used.
802.1Q tagging All packets are untagged on the default VLAN
(default)
BOOTP Enabled on the default VLAN (default)
Spanning Tree Protocol Disabled; one defined as “s0”
IP Routing Disabled
Forwarding database aging
period
30 minutes
Auto-negotiation On
SW9000.BK Page 9 Wednesday, April 1, 1998 11:00 AM