Filter
Top Products
4-22 CHAPTER 4: COMMANDS
config syslog <ipaddress> <facility>
{<priority>} {<subsystem>}
Allows you to configure the syslog host address and
filter messages sent to the syslog host. Options include:
■ ipaddress — The IP address of the syslog host.
■ facility — The syslog facility level for local use.
■ priority — Filters the log to display message with the
selected priority or higher (more critical). Priorities
include critical, warning, and informational. If not
specified, only critical priority messages are sent to
the syslog host.
■ subsystem — Filters the log to display messages
associated with the selected Switch subsystem.
Subsystems include Syst, STP Brdg, SNMP, Telnet,
VLAN, and Port. If not specified, all subsystems are
sent to the syslog host.
enable log display Allows you to enable the log display.
enable syslog Allows you to enable logging to a remote syslog host.
disable log display Allows you to disable the log display.
disable syslog Allows you to disable logging to a remote syslog host.
Table 4-18 Logging Commands (continued)
Command Description
SW9000.BK Page 22 Wednesday, April 1, 1998 11:00 AM