Filter
Top Products
Chapter 3
AT7/AT7E
3-30
Figure 3-7C. IRQ Wakeup Events Setup Menu
All Interrupt Event:
Two options are available: Off or Manual. The default setting is Manual. When you set this item to
Manual, the following IRQ events will be available for adjustment.
When set to Disabled, activity will neither prevent the system from going into a power management mode
nor awaken it. Each item has two options: Enabled ( Disabled.
"
IRQ3 (Reserved): The default setting is Disabled.
"
IRQ4 (Reserved): The default setting is Disabled.
"
IRQ5 (Reserved): The default setting is Disabled.
"
IRQ6 (Floppy Disk): The default setting is Enabled.
"
IRQ7 (Reserved): The default setting is Disabled.
"
IRQ8 (RTC Alarm): The default setting is Disabled.
"
IRQ9 (IRQ2 Redir): The default setting is Disabled.
"
IRQ10 (Reserved): The default setting is Disabled.
"
IRQ11 (Reserved): The default setting is Disabled.
"
IRQ12(Reserved): The default setting is Disabled.
"
IRQ13 (Coprocessor): The default setting is Enabled.
"
IRQ14 (Hard Disk): The default setting is Enabled.
"
IRQ15 (Reserved): The default setting is Disabled.