Filter
Top Products
VIA 4 in 1 Drivers Installation for Windows
®
2000 A-1
User’s Manual
Appendix A. VIA 4 in 1 Drivers Installation for
Windows
®
2000
After you’ve installed Windows
®
2000, you will need to install the VIA 4 in 1 drivers. Step by step
instructions on how to do this are found in the following section.
Note
After installing Windows
®
2000, the quality of your display will be poor because it will be set to
640*480 and 16 colors. For the best screen capture quality, install the VGA drivers and set the
desktop to 800*600 using True Color.
Note
Under Windows
®
2000 operating system you have to install the service pack 2 (SP2) or latest service
pack to get the best system performance. You can download SP2 at Microsoft
®
WEB site.
Note
Details of the Windows
®
2000 operating system will not be mentioned in this manual. If you have any
problems with Windows
®
2000 installation, operations, or settings, please refer to your Windows
®
2000 user's manual or other databases provided by Microsoft
®
Corporation.
Insert the AT7 series CD into your CD-ROM drive, it should execute the program automatically. If not,
you can go to the CD location and execute the execution file at the main directory of the CD. After it has
been executed you will see the screen below.
Step 1: Move the cursor to “VIA 4in1 Driver”
and click on it. You will go to the next screen.
Step 2: The “InstallShield Wizard” shows up,
and it will go to the next screen for a while.