Filter
Top Products
4-2 Chapter 4
AT7/AT7E
4-3. The BIOS Setting Menu
Reboot your system. Press <CTRL> and <H> key while booting up the system to enter the BIOS setting
menu. The main menu of BIOS Setting Utility appears as below:
For selecting the option in the menu, you may:
! Press F1 to view array status.
! Press ↑↓ (up, down arrow) to choose the option you want to confirm or to modify.
! Press Enter to confirm the selection.
! Press Esc to return to top menu.
NOTE
If you want to create a RAID 0 (striping) array or RAID 0+1 array, all data in your hard disk will first
be erased! Please backup the hard disk data before creating a RAID array. If you want to create a
RAID 1 (mirroring) array, please be sure which hard disk is the source disk and which one is the
destination disk. If you make a mistake, you may copy the blank data to the source disk, which will
result in both hard disks becoming blank!