Filter
Top Products
34 Chapter 2
Boot Display Set the display output device on boot up.
Help:
Set the display output device on boot up.
When set to Auto, the computer automatically determines the display
device. If an external display device (e.g., monitor) is connected, it
becomes the boot display. When set to Both, the computer outputs to both
the LCD and the external display if one is connected.
Option: Both or
Auto
Screen Expansion Options:
Enable
or Disable.
Help:
Options: Enable or Disable.
QuickBoot Mode Options:
Enable
or Disable
Help:
Allow the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
Boot-time Diagnostic Screen Options: Enable
or
Disable
Help:
Display the diagnostic screen during boot.
Boot on LAN Options: Enable or
Disable.
Help:
When set to enabled, system will boot on LAN.
Notice: Need to restart system for enabling Boot-on-LAN function.
Hotkey Beep Options:
Enable
or Disable
Help:
Enable or disable hotkey beep.
Auto Dim Options:
Enable
or Disable
Help:
The system will support an automatic dim in of the LCD backlight
when the AC power is NOT available (running on battery power).
F12 Multi-Boot Options:
Enable
or Disable.
Help:
Users could choose if to display ‘Fn-F12 for multi-boot’ message
during post
Parameter Description