Filter
Top Products
66 Chapter 3
7. Release the six screws from the bottom of the main unit as shown below and then remove the upper case
from the main unit gently.
Removing the TouchPad Module
1. See “Removing the Battery Pack” on page 57
2. See “Removing the Middle Cover” on page 62
3. See “Removing the Keyboard” on page 62
4. See “Removing the LCD Module” on page 63
5. See “Removing the RTC Battery” on page 64
6. See “Separating the Lower Case from the Upper Case” on page 65
7. Snap off the touchpad frame from the upper case carefully and then remove the touchpad button and the
scroll key from the upper case.
8. Disconnect the cable from the touchpad board, remove the touchpad board and touch pad FPC from the
upper case.