Filter
Top Products
Chapter 3 69
9. Remove the four hex screw as shown here and then the other one on the bottom side of the main board.
Detach the main board from the I/O port chassis.
Removing the PCMCIA Socket
1. See “Removing the Battery Pack” on page 57
2. See “Removing the Middle Cover” on page 62
3. See “Removing the Keyboard” on page 62
4. See “Removing the LCD Module” on page 63
5. See “Removing the RTC Battery” on page 64
6. See “Separating the Lower Case from the Upper Case” on page 65
7. See “Removing the Daughter Board” on page 67
8. See “Removing the Main Board” on page 68
9. See “Removing I/O Port Chassis” on page 68
10. Release the four screws as shown here, remove the PCMCIA cable from the main board, and then detach
the PCMCIA socket from the main board.