Filter
Top Products
Chapter 2 35
Startup Configuration
The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
The following table describes the parameters in this screen. Settings in
boldface
are the default and
suggested parameter settings.
Parameter Description Options
CPU Speed Set CPU high speed or low speed.
High
or Low
Legacy Diskette A
Help:
Selects floppy type. Note that 1.25MB 3 1/2”
references a 1024 byte/sector Japanese media
format. The 1.25MB, 3 1/2” diskette requires a 3-Mode
floppy-disk drive.
Options:
1.44/1.25MB 3 1/2”
or Disabled
Primary Master Show Primary Master HD size.
User can enter submenu to set some detail functions
Auto
or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
Secondary Master Show Secondary Master Device Status.
User can enter submenu to set some detail functions.
Auto
or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
I/O Device Configuration Enter submenu to set onboard device configuration
Help:
Pheripheral Configuration.
PCI IRQ Routing Set Default IRQ of PCI device.
Help: Menu used to setting IRQ for PCI Devices.
USB Host Controller Set Enabled or Disabled the USB hardware
Help:
Disabled resources will be freed up for other
uses.
Enabled
or Disabled
PhoenixBIOS Setup Utility
Information
Main
Advanced
Security Boot Exit
Item Specific Help
CPU Speed [High]
Legacy Diskette A: [1.44/1.25MB 3 ½”]
>Primary Master [TOSHIBA MK2018GAP-(PM)]
>Secondary Master [MATSHITADVD-ROM SR-81]
>I/O Device Configuration
>PCI IRQ Routing
USB Host Controller: [Enabled]
USB BIOS Legacy Support: [Enabled]
Temporary solution
F1
Help
"#$
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
%&
%&%&
%&
Select Menu
Enter
Select > Sub Menu
F10
Save and Exit