Filter
Top Products
117
8 Move the cursor to the Hot Spr
column and select another disk.
9 Press the space bar to change the setting from No to Yes.
The Drive Status will be marked as Hot Spare
.
10 Press C, then select Save changes then exit this menu.
11 Press Esc twice and select Exit the Configuration Utility and
Reboot.
Proceed to the installation of the operating system. Refer to the
user documentation that came with your OS for related
instructions.
LSI MegaRAID SAS RAID Configuration Utility
This section explains how to create a RAID 1 volume when the LSI
MegaRAID SAS RAID controller board is installed.
To initialize the LSI MegaRAID SAS RAID Configuration Utility:
1 Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2 During POST, press Ctrl-H on the RAID BIOS prompt.
After POST completion, the Adapter Selection
window will appear.
3 Click Start to launch the Configuration
menu.
To load the factory default RAID setting:
1 On the Configuration menu, select Adapter Properties to display
the current adapter settings.
2 Click Next to change the adapter setting.
3 Change the setting of Set Factory Defaults
from No to Yes, then
click Submit.
4Press Ctrl+Alt+Del to reboot the server.