Filter
Top Products
123
Screw types
The following screws are used in the assembly of the Altos G540 system
and bundled rack-mountable components.
Front brackets 2 Attach the mounting rails to the server.
Rear brackets 2
Side handles 2 Attached to the sides of the server.
Screw pack Secures the different rack components.
Refer to the next section for details.
Screw type Quantity Figure Usage
M6 X 13 8 Install the mounting rails to the
rack.
M6 x 18 2 Secure the cable arm to the rack.
M6 cage nut 2 Install into the vertical rails of the
rack for cable arm support.
Distand 8 Install into the vertical rails of the
rack for server support.
M4 x 5 4 Secure the mounting rails to the
chassis.
U#6-32 x 6.4 6 • Secure the rack handles to the
chassis (4).
• Attach the cable arm to the
chassis (2).
Component Quantity Usage