ADC ICX-250 Switch User Manual


 
28 Configuring the ICX-250 Switches
ADCP-62-023 Issue 1, September 1998
© 1998, ADC Telecommunications, Inc.
FXS Ports - Trunk Conditioning
(
DIP switches - internal)
Description:
S6 position 6 and S7 position 6 selects the trunk conditioning state.
Factory Setting:
IDLE
Idle:
In the event of an alarm condition in the T1 connection to the network, the FXS Ports will be
put into the idle state immediately and remain in this condition until the T1 has been restored.
Idle Immediate/Busy Delay:
In the event of an alarm condition in the T1 connection between the
ICX-250 and the network, the FXS Ports will be put into the Idle state immediately for 3 seconds
and then put into the Busy state and remain in this condition until the T1 has been restored.
The DIP switch settings shown in the illustration above are for Switch S6 and S7.
1 2 3 4 5 6 7 8
ON DIP
S7
1 2 3 4 5 6 7 8
ON DIP
S6
1 2 3 4 5 6 7 8
ON DIP
S17
1 2 3 4 5 6 7 8
ON DIP
S18
1 2 3 4 5 6 7 8
ON DIP
S19
1 2 3 4 5 6 7 8
ON DIP
S14
1 2 3 4 5 6 7 8
ON DIP
S16
1 2 3 4 5 6 7 8
ON DIP
S15
S1
S2
S3
S4 S5
BACK
FRONT
S16
S15
S19
S18
S17
S14
S7
S6
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8
ON DIP
IDLE
IDLE/BUSY