Filter
Top Products
April 14, 2006 Chapter 3: Provisioning
MM70xG2-UM-03 3-3
Step Action
1Select LAN on the menu bar, then select DNS Relay under LAN Options to access the DNS Relay
mode page (Figure 3-2).
Figure 3-2. DNS Relay Mode Page
2Select Enabled, then click Configure to access the following DNS: Enable Relay page (Figure 3-3).
Figure 3-3. DNS Enable Relay Page
3 Enter the DNS server IP address for the device to which the modem will forward IP address resolution
requests.
4 Click Apply.
Note: If DHCP Client is selected (see “Configure the LAN” on page 3-1) and a DNS server IP
address assigned, then DNS: Enable Relay is automatically enabled and the DNS server IP
address automatically displayed in that field.