Filter
Top Products
Chapter 7: Implementing a Point-to-Point LAN Extension April 14, 2006
7-6 MM70xG2-UM-03
Configure the Central-Office Modem
To configure the central-office modem, you need to change the following settings:
• Operating mode for the modem, (see “Configure the Central-Office Operating Mode” on page 7-6)
• WAN parameters, (see “Configure the Central-Office WAN” on page 7-7)
• LAN parameters, (see “Configure the Central-Office LAN” on page 7-8)
Configure the Central-Office Operating Mode
5Select Save Changes on the menu bar to access the Save Changes page (Figure 7-7).
Figure 7-7. Save Changes Page
6 Click Save to save the configuration to flash memory.
Step Action
1Select DSL on the menu bar; then select Advance Configuration under DSL Options.
Figure 7-8. G.SHDSL Advanced Configuration—Change CO Operating Mode
2 In the Operating Mode box, select CO to configure the modem for this mode.
3 Click Apply.
Step Action