Filter
Top Products
Appendix A: Command Line Interface Access April 14, 2006
A-4 MM70xG2-UM-03
5 In the COM1 Properties dialog, enter the Port Settings as follows:
• 9600 baud
• 8 data bits
•no parity
• 1 stop bit
• flow control off (none)
6 Click OK.
7 Press ENTER. A prompt will be displayed (see Figure A-3); enter your login and password.
Figure A-3. Login Prompt
The System Management main menu is displayed (Figure A-4).
Figure A-4. System Management Main Menu
Type the number and press ENTER to access the configuration menu for each parameter (WAN Session
Management or LAN Management, for example). Press ENTER (<CR>) at the prompt to return to a
higher-level menu.
Step Action
Modem Defaults
Login admin
Password password