Filter
Top Products
Chapter 5: Configuring System Parameters April 14, 2006
5-4 MM70xG2-UM-03
ADD A DEFAULT GATEWAY
The modem default gateway is a IP address through which packets are routed to the internet if the next hop IP
address cannot be identified by the modem. Use the IP address of a router on the LAN or WAN end. If the network
does not have gateways, use the default value (0.0.0.0).
When setting the modem default gateway, if the first session you set up was a PPP session, the IP address that was
dynamically assigned to that PPP session was also automatically assigned as the default gateway. If you do not
want this IP address (PPP WAN session) as the default gateway, then use this page to change it to another value.
Step Action
1Select System on the menu bar, then select Default Gateway under Configuration to access the
Default Gateway page (Figure 5-4).
Figure 5-4. Default Gateway
2 To add a default gateway, enter the IP address for the gateway through which the modem will forward
packets. Click Apply.
3 To remove the default gateway IP address, click Delete.