Filter
Top Products
April 14, 2006 Chapter 9: Managing the Modem
MM70xG2-UM-03 9-7
VIEW ATM STATISTICS
The ATM Statistics page provides information about the cells that are transmitted on the ATM layer.
Step Action
1Select System on the menu bar, then select ATM Statistics under Status to access the ATM Statistics
page (Figure 9-6).
Figure 9-6. ATM Statistics
2 View the current statistics as described below.
•Rx Cell
Indicates the total number of cells received by the modem on the DSL interface.
•Tx Cell
Indicates the total number of cells transmitted by the modem over the DSL interface.
•Cell Drop
Indicates the total number of cells dropped by the modem.
• Cell Delineation Flag
Indicates if cell delineation errors have occurred on the modem. A 0 indicates that no errors have
occurred A 1 indicates that errors have occurred.
• Rx HEC Errors
Indicates the total number of received ATM cells marked with uncorrectable header errors as indicated
in the header-error control (HEC) byte.
3 Click one of the following, if appropriate:
• Clear—resets all the counters to zero.
• Refresh—updates the page with more current error counts.