Filter
Top Products
61200214L1-1 IQ Probe User Manual 63
Chapter 9. System Configuration
Chapter 9
System Configuration
Access System configuration selections by first choosing CON-
FIGURATION from the Main menu. Then choose SYSTEM from
the Configuration menu. Full menu trees for the System con-
figuration selections are shown in Figures 5-2 (Terminal Configu-
ration Menu Tree) and 5-3 (Front Panel Configuration Menu Tree).
The Terminal System configuration menu is shown in Figure 9-1.
In this chapter, the terminal selections are listed first followed by the
Front Panel selections in parenthesis (if the names differ).
Change Password (not available on front panel)
Enter a new password of ten characters or less. The default
password is adtran.
Ethernet Port
Choose to either enable or disable the LAN 10baseT ethernet
port. Set to disable if the IQ Probe's IP address is not a member
of the local ethernet subnet.
IP Address
Enter the IQ Probe IP (internet protocol) address.