Filter
Top Products
Installation
1-4
Important • Place the process unit on a clean, level surface.
• Never expose the process unit to any sort of impact or shock.
• The drum in the process unit is sensitive to light. Never expose the drum even to normal office
lighting (500 lux) for more than five minutes.
2
Move the lock lever (L) towards you until it is in its
unlocked position (marked UNLOCK).
3
Shake the toner container horizontally back and forth 5
or 6 times so that the toner inside of it becomes evenly
distributed.
4
Remove the orange protective seal (M).
5
Align the knob on the left side of the container with the
groove in the process unit and set the toner container
into the process unit. Push on the PUSH HERE marks
on the toner container until the container clicks into
place.
(L)
(M)