Preparations
3-5
2
Pull out the MP tray extension and then flip it open.
3
Adjust the paper width guides to fit the width of the
paper.
4
Slide the paper all the way in, along the paper width
guides, as far as it will go.
When you are setting paper on the MP tray, make sure
that the side to be copied or printed onto is facing
upward.
Notes • Only load the MP Tray when you are planning to use it. Do not leave paper in the MP tray for
long periods of time.
• When using 8 1/2 x 14" (Legal), 8 1/2 x 13" (Oficio II), or Folio size paper, it is recommended
that you use the cassette(s). If you need to use the MP Tray and the paper does not feed
smoothly, continue to support the paper by its trailing edge until all of the paper has been fed
into the machine.