Filter
Top Products
Troubleshooting
7-7
MP Tray and Inside Machine
Note
If there are any printouts on the output tray, remove them first before performing this procedure.
1
Open the top cover.
2
Open the front cover.
3
Take the process unit out of the machine.
4
If the leading edge of the jammed paper is visible, pull
it out towards you.
If the paper is not visible at all, perform the Cassette
procedure.
If the paper has been fed to the rear of the machine but
the leading edge is not visible, perform the Face-up
Tray procedure.
5
Set the process unit into the machine by aligning the
pins on both sides of the process unit with the guides
inside the machine, and slide the process unit all the
way back into the machine until it stops.