Filter
Top Products
Optional Equipment
5-3
Important • Before setting new originals, make sure that there are no other originals remaining on the
original eject table. Originals left on the eject table can cause other originals to jam.
• Be sure to fan through the originals a few times to separate the sheets before setting them in
the document processor.
2
Arrange the originals in order and set them face up on
the original table. Slide the leading edge of the originals
securely into the document processor as far as they will
go.
Important Be sure to set only a number of originals that is less
than the level indicator on inside of the rear insert
guide. Setting more than the acceptable number of
originals can cause the originals to jam.
To keep ejected originals from falling off the machine,
open the ejection extension when using larger sized
originals such as 8
1/2 × 13"/Oficio II, 8 1/2 × 14"/Legal,
and Folio.