Filter
Top Products
4.5.5 INITIAL Menu
The INITIAL menu (Table 4–12) combines the macro, paint, and paper size
features. You can save settings from this menu only in NVRAM.
Table 4–12: INITIAL Menu Features and Values
Feature Values Description
macro 000
1
–099 Assigns the user preference set and device identification
answer (see Section 4.5.5.1).
paint Partial
1
None of the memory is reserved for bitmap pages.
Memory is allocated dynamically.
Full Directs the printer to allocate memory space for one
full bitmap page (A4 or letter-size). The Full setting
eliminates complex errors but may slow the printer down
if all pages require a full bitmap.
NOTE: This value can be activated only if at least 1 MB
of optional RAM is installed in the printer.
Dual Directs the printer to allocate memory space for two full
bitmap pages (A4 or letter-size). The Dual setting allows
you to print at a more efficient speed for documents that
require full page bitmaps for all pages. It also allows you
to print duplex pages, for which each side requires a full
page bitmap. The Dual setting requires more memory
space that must be shared with fonts.
NOTE: This value can be activated only if at least 2 MB
of optional RAM is installed in the printer.
paper letter
1
Specifies letter-size (8 ½" x 11.0") paper for manual feed
operation.
A4 Specifies A4-size (297 mm x 210 mm) paper for manual
feed operation.
1
Factory default setting.
Printer Configuration 4–23