Filter
Top Products
Use the following procedure to acknowledge the error condition and
continue printing:
1. Press
Error Skip
.
— The Alarm indicator shuts off.
— The error condition clears.
— The display reads 00 READY.
2. Press
On Line
.
— The On Line indicator lights.
— Printing continues.
Some communication or formatting errors may repeat when the printer is
receiving additional communications data. When this happens you may
need to repeat the error skip procedure several times.
6.2 Printer Status Messages
Printer status messages are displayed to show the printer’s current
operating condition (see Table 6–1). This status information lets you know
if the printer is performing a task or is ready to receive another job. Status
messages are displayed whether the printer is on line or off line.
Table 6–1: Printer Status Messages
Message Meaning
00 READY The printer is ready to operate. The ready condition can exist
whether the printer is on line or off line.
01 TEST PRINT B Test Print B is being printed (Section 2.13).
02 WARMING UP The printer has not reached operating temperature. Printing
cannot be performed while the printer is warming up.
03 RESET The printer is being reset (Section 2.16).
04 TEST STOP Test printing has stopped.
05 TEST PRINT A Test Print A is being printed (Section 2.12).
06 FONT LIST A Font List A is being printed (Section 2.14).
15 ENGINE TEST The mechanical engine test is being executed (Section 2.11).
6–2 DEClaser 2100 Printer Operator’s Guide