Filter
Top Products
2.16 Resetting the Printer
There are two methods of resetting the printer:
• You can perform a hard reset by powering the printer off and then
back on.
• You can perform a soft reset by pressing
Reset
.
The primary reasons for a soft reset of the printer are to exit Control
Representation Mode, and to clear data in the page buffer.
Use the procedure in Table 2–7 to perform a soft reset.
Table 2–7: Resetting the Printer
Operation Display Reads
1. Press
On Line
to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press and hold
Reset
for about
three seconds.
03 RESET
00 READY
3. Press
On Line
to place the
printer back on line.
— The On Line indicator
lights.
00 READY
2–50 DEClaser 2100 Printer Operator’s Guide