Filter
Top Products
8. Insert a single sheet of paper, labels, or a transparency into the printer
until it stops.
— The paper is automatically fed into the printer.
— The printed paper is sent to the preselected output paper tray.
NOTE: It is advisable to remove transparencies from the rear output
tray as each one is printed. This prevents them from sticking together.
Fig 2-19, MLO-004842
9. Wait until PF FEED xxx is displayed and repeat step 8.
Continue feeding paper until the Data indicator light shuts off and
the display reads 00 READY.
If you want to continue feeding paper manually after the display
reads 00 READY, go to step 6. If you have finished feeding paper
manually, go to step 10.
2–18 DEClaser 2100 Printer Operator’s Guide