Filter
Top Products
3. Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
4. Press
Manual Feed
(once or twice) until the display reads
FEEDER = Manual.
— After about three seconds the display will read 00 READY.
— The manual feed mode selection is now stored in operating memory.
5. Press
On Line
to place the printer back on line.
— The On Line indicator lights.
6. Send data from the host computer to the printer.
— The Data indicator lights and the display reads PF FEED xxx
(where xxx = paper size).
7. Adjust the manual feed guides to accept the width of the paper.
Fig 2-18, MLO-004841
Operating Information 2–17