9. Take the printed paper from the rear output tray and insert it into the
printer printed side down when PF FEED xxx is displayed.
Fig 2-27, MLO-004845
10. Continue feeding paper until the Data indicator light shuts off and the
display reads 00 READY.
If you want to continue duplex printing, go to step 6 after the display
reads 00 READY. If you have finished duplex printing, go to step
11.
11. Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
12. Press
Manual Feed
twice until the display reads FEEDER = Cass.
— After about three seconds the display will read 00 READY.
— The cassette feed mode selection is now stored in operating
memory.
13. Press
On Line
to place the printer back on line.
— The On Line indicator lights.
Operating Information 2–25