Filter
Top Products
Table 4–16 (Cont.): INTERFACE Menu Features and Values
Feature Values Description
8OS 8 data bits
Odd parity check
1 stop bit
7ESS 7 data bits
Even parity check
2 stop bits
7OSS 7 data bits
Odd parity check
2 stop bits
7ES 7 data bits
Even parity check
1 stop bit
7OS 7 data bits
Odd parity check
1 stop bit
8SS 8 data bits
No parity check
2 stop bits
dtr
2
Fix-H
1
Sets the DTR line to a fixed high signal.
Ready-H Sets the DTR line to a high signal when
the printer is ready to receive data.
xon/xoff
2
ON
1
Enables buffer overflow control.
OFF Disables buffer overflow control.
etx/ack
2
OFF
1
Disables buffer overflow control.
ON Enables buffer overflow control.
NOTE: Etx/ack is not supported on Digital
systems.
1
Factory default setting.
2
Available only when RS232C is selected.
4.5.6.1 Interface Selection (i/f)
The interface selection (i/f) feature selects the type of interface used to
communicate with the host computer. It must match the interface used by
the host computer, either serial or parallel.
When you select the parallel interface, you do not select any other settings
in the INTERFACE menu. The other features in this menu apply only
4–28 DEClaser 2100 Printer Operator’s Guide